睿地可靠度論壇(TW-REDI Forum)

標題: IEC 61124:2012: 可靠度試驗-常數失效率與常數失效強度符合性... [打印本頁]

作者: hlperng    時間: 2013-4-4 22:33:38     標題: IEC 61124:2012: 可靠度試驗-常數失效率與常數失效強度符合性...

本帖最後由 hlperng 於 2013-4-5 21:21 編輯

IEC 61124:2012,可靠度試驗-常數失效率與常數失效強度符合性試驗 (IEC 61124, Reliability Testing - Compliance Tests for Constant Failure Rate and Constant Failure Intensity)

2012年改版為第3版(ed 3.0),1997年取代IEC 60605-7, Equipment Reliability Testing - Part 7: Compliance Test Plans for Failure Rate and Mean Time Between Failure Assuming Constant Failure Rate

考量四項可靠度指標:
提供四種試驗方案(test plans):


國際標準IEC 61124:2012不包括有關如何規劃、執行、分析、及報告可靠度試驗的內容,這些資訊規定在國際標準IEC 60300-3-5:2001。

2012年改版為第3版(ed 3.0)改版重點包括:
IEC 61124:2012 gives a number of optimized test plans, the corresponding operating characteristic curves and expected test times. In addition the algorithms for designing test plans using a spreadsheet program are also given, together with guidance on how to choose test plans. This standard specifies procedures to test whether an observed value of: failure rate, failure intensity, meantime to failure (MTTF), and mean operating time between failures (MTBF). The main changes with respect to the previous edition are as follows:

從IEC官網下載EC 61124:2012 (只有目錄Table of Contents)

Table of Contents
1. Scope
2. Normative References
3. Terms, Definitions, Abbreviations and Symbols
4. General Requirements and Area of Application
4.1 Requirements
4.2 Applicability to Replaced and Repaired Items
4.3 Types of Test Plans
4.3.1 General
4.3.2 Advantages and Disadvantages of the Different Test Plan Types

5. General Test Procedure
5.1 Test Conditions
5.2 General Characteristics of the Test Plans
5.3 Data to be Recorded
5.4 Calculation of Accumulated Test Time, T*
5.5 Number of Failures

6. Sequential Test Plans
6.1 General
6.2 Common Test Procedure
6.3 Decision Criteria
6.4 Overview of Test Plans

7. Fixed Time/Failure Terminated Test Plans - Fixed Duration Test Plans
7.1 General
7.2 Common Test Procedure
7.3 Decision Criteria
7.4 Test Plans

8. Design of Alternative Time/Failure Terminated Test Plans
8.1 General
8.2 Design Procedure
8.3 Common Test Procedure
8.4 Decision Criteria

9. Calendar Time/Failure Terminated Test Plans for Non-Replaced Items
9.1 General
9.2 Common Test Procedure
9.3 Decision Criteria
9.4 Use of Table 2 of IEC 61123:1991 for Fixed Calendar Time Tests
9.4.1 General
9.4.2 Procedure when the Test Time is given
9.4.3 Procedure when the Number of Items is given

10. Combined Test Plans10.1 General
10.2 Common Test Procedure
10.3 Decision Criteria
10.4 Test Plans

11. Performing the Test

12. Presentation of Results

Annex A (normative): Tables and Graphs for Sequential Test Plans
Annex B (normative): Graphs for Fixed Time/Failure Terminated Test Plans
Annex C (normative): Graphs for Alternative Time/Failure Terminated Test Plans
Annex D (normative): Tables and Graphs for Combined Test Plans and Additional Sequential Test Plans
Annex E (informative): Examples and Mathematical References for Sequential Test Plans
Annex F (informative): Design of Sequential Test Plans Using a Common Spreadsheet Program
Annex G (informative ): Example and Mathematical References for Fixed Time/Failure Terminated Test Plans - Fixed Duration Test Plans
Annex H (informative): Design of Fixed Duration Time/Failure Terminated Test Plans Using a Spreadsheet Program
Annex I (informative): Example and Mathematical References for the Design of Alternative Time/Failure Terminated Test Plans
Annex J (informative): Example and Mathematical References for the Calender Time Terminated Test Plans
Annex K (informative): Derivation and Mathematical Reference for the Optimized Test Plans of GOST R 27 402

Bibliography








歡迎光臨 睿地可靠度論壇(TW-REDI Forum) (http://tw-redi.com/) Powered by Discuz! X2