管制圖相關標準
本帖最後由 hlperng 於 2017-11-12 04:09 編輯管制圖（控制圖） (control chart) 是過程管理 (process management) 工作項目之一。過程管理相關相關標準的發展，從早期的過程控制（製程管制或製程控制） (process control) 的管制圖開始，目前逐步發展到統計過程控制（統計製程管制）(statistical process control)，以及過程（製程）能力與性能（績效）(capability and performance) 的度量。1992 年以後，在世界貿易組織 (WTO) 為避免技術性貿易障ˋ礙（壁壘）(TBT) 所推動的國際標準與國家標準調和 (harmonization) 的努力下，過程管理相關國際標準的準備與制定工作，係由國際標準化組織 (ISO) 轄下的 ISO/TC 69 /SC 4 〈統計方法在產品與過程管理之應用〉(applications of statistical methods in product and process management) 次技術委員會負責，主要的工作重點分為三大部分：
[*]管制圖 ISO 7870 系列，由第 10 工作小組 (SC 4/WG 10: Revison of control charts standards) 負責；
[*]製程能力與績效 ISO 22514 系列，由第 11 工作小組 (SC 4/WG 11: Process capability and performance) ；及
[*]統計製程管制實施 ISO 11462 系列，由第 12 工作小組 (SC 4/WG 12: Implementation of statistical process control)。
各國的國家標準，如歐盟 (EN)、英國 (BS)、美國 (ANS) 等，對於過程管理標準多採等同 (IDT) 、修改 (MOD)、不同 (NEQ) 三種國家標準採用國際標準調和引用原則中的等同 (IDT) 原則。
以下就目前所蒐集的過程管理相關標準資料依年分排序說明：
[*]BS 2564:1955, Control chart technique when manufacturing to a specification, with special reference to articles machnies to dimensional tolerances
[*]ANSI/ASQC B1:1958, Guide for quality control charts
[*]ANSI/ASQC B2:1958, Control chart methods of analyzing data
[*]ANSI/ASQC B3:1958, Control chart method for controlling quality during production
[*]CNS 2312:1965，分析數據用的管制圖
[*]CNS 2312:1974，分析數據用的管制圖
[*]CNS 10301:1983，個別值與移動全距管制圖 (X Control chart)
[*]BS 5700:1984, Guide to process control using quality control chart methods and cusum techniques
[*]ISO 8258:1991 (ed1.0), Schewhart control charts (withdrawn and revised by ISO 7870-2:2013)
[*]ISO 7870-1993 (ed1.0), Control charts - General guide and introduction (withdrawn on 2007-12-05)
[*]ISO 7966:1993 (ed1.0), Acceptance control charts (withdrawn and revised by ISO 7870-3:2012)
[*]BS 7785:1994, Shewhart control charts
[*]ANSI/ASQC B1:1996, Guide for quality control charts
[*]ANSI/ASQC B2:1996, Control chart methods of analyzing data
[*]ANSI/ASQC B3:1996, Control chart methods of controlling quality during production
[*]GOST R 51814-3:2001, Quality systems for automotive industry - Methods of statistical process control
[*]ISO 11462-1:2001 (ed1.0), Guidelines for implementation of statistical process control (SPC) - Part 1: Elements of SPC
[*]BS ISO 11452-1:2001, Guidelines for implementation of statistical process control (SPC). Part 1: Element of SPC
[*]BS 5701-2:2001, Guide to statistical process control (SPC) charts for variables - Part 1: Charts for mean, median, range, and standard deviation
[*]BS 5701-1:2003, Guide to quality control and performance improvement using qualitative (attribute) data. Uses and value of attribute charts in business, industry, commernce and public service
[*]BS 5701-2:2003, Guide to quality control and performance improvement using qualitative (attribute) data. Fundamentatls of standard attribute charting for monitoring, control and improvement
[*]BS 5701-3:2003, Guide to quality control and performance improvement using qualitative (attribute) data. Technical aspects of attribute charting. Special situation handling
[*]BS 5701-4:2003, Guide to quality control and performance improvement using qualitative (attribute) data. Attribute inspection performance control and improvement
[*]BS 5703-1:2003, Guide to data analysis and quality control using cusum techniques. Part 1: Uses and value of cusum charts in business, industry, commerces, and public service
[*]BS 5703-2:2003, Guide to data analysis and quality control using cusum techniques. Part 2: Introduction to decision-making using cusum techniques
[*]BS 5703-3:2003, Guide to data analysis and quality control using cusum techniques. Part 3: Cusum methods for process/quality control using measured data
[*]BS 5703-4:2003, Guide to data analysis and quality control using cusum techniques. Part 4: Cusum methods for discrete (count/classified) data
[*]ISO 21747:2006 (ed1.0), Statistical methods - Process performance and capability statistics for measured quality characteristics (withdrawn and replaced by ISO 22514-2:2013)
[*]BS ISO 21747:2006, Statistical methods. Process performance and capability statistics for measured quality characteristics
[*]ISO 7870-1:2007 (ed1.0), Control charts - Part 1: General guidelines (withdrawn on 2014-01-22)
[*]BS ISO 7870-1:2007, Control charts. Part 1: General guidelines
[*]ISO 22514-4:2007, Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures (withdrawn and replaced by ISO 22514-4:2016)
[*]ISO 22514-3:2008 (ed1.0), Statistical methods in process management - Capability and performance - Part 3: Machine performance studies for measured data on discrete parts
[*]BS ISO 22514-3:2008, Statistical method in process management - Capability and performance. Part 3: Machine performance studies for measured data on discrete parts
[*]BS 5702-2:2008, Guide to statistical process control (SPC) charts for variables - Part 2: Charts for individual values
[*]BS 5702-3:2008, Guide to statistical process control (SPC) charts for variables - Part 3: Charting techniques for short runs and small mixed batches
[*]ISO 22514-1:2009 (ed1.0), Statistical methods in process management - Capability and performance - Part 1: General principles and concepts
[*]BS ISO 22514-1:2009, Statistical methods in process management. Capability and performance. Part 1: General principles and concepts
[*]ISO 11462-2:2010 (ed1.0), Guidelines for implementation of statistical process control (SPC) - Part 2: Catelogue of tools and techniques
[*]ISO 7870-4:2011 (ed1.0), Control charts - Part 4: Cumulative sum charts
[*]BS ISO 7870-4:2011, Control charts. Cumulative sum charts
[*]ISO 7870-3:2012 (ed1.0), Control charts - Part 3: Acceptance control charts
[*]ASQ/ANSI/ISO 7870-3:2012, Control charts - Part 3: Acceptance control charts
[*]BS ISO 7870-3:2013, Control charts. Acceptance control charts
[*]ISO 22514-7:2012 (ed1.0), Statistical methods in process management - Capability and performance - Part 7: Capability of measurement processes
[*]ISO 7870-2:2013 (ed1.0), Control charts - Part 2: Shewhart control charts
[*]ASQ/ANSI/ISO 7870-2:2013, Control charts - Part 2: Schewhart control charts
[*]BS ISO 7870-2:2013, Control charts - Shewhart control charts
[*]ISO 22514-2:2013 (ed1.0), Statistical methods in process management - Capability and performance - Part 2: Process capability and performance of time-depedent process models
[*]ISO 22514-6:2013 (ed1.0), Statistical methods in process management - Capability and performance - Part 6: Process capability statistics for characteristics following a multivariate normal distribution
[*]ISO 7870-1:2014 (ed2.0), Control charts - Part 1: General guidelines
[*]ASQ/ANSI/ISO 7870-1:2014, Control charts - Part 1: General guidelines
[*]BS ISO 7870-1:2014, Control charts. General guidelines
[*]ISO 22514-1:2014 (ed2.0), Statistical methods in process management - Capability and performance - Part 1: General principles and concepts
[*]ISO 7870-5:2014 (ed1.0), Control charts - Part 5: Specialized control charts
[*]BS ISO 7879-5:2014, Control charts. Specialized control charts
[*]ISO 22514-8:2014 (ed1.0), Statistical methods in process management - Capability and performance - Part 8: Machine performance of a multi-state production process (37 pages)
[*]BS 5700:2015, Guide to the selection of charting methods and capability assessment for use in statistical process control
[*]ISO 7870-1:2016 (ed3.0-wd), Control charts - Part 1: General guidelines
[*]ISO 7870-6:2016 (ed1.0), Control charts - Part 6: EWMA control charts
[*]BS ISO 7870-6:2016, Control charts - EWMA control charts
[*]ISO 7870-7:2016 (ed1.0-wd), Control charts - Part 7: Multivariate control charts
[*]ISO 7870-8:2016 (ed1.0-dis), Control charts - Part 8: Charting techniques for short runs and small mixed batches
[*]ISO 7870-9:2016 (ed1.0-wd), Control charts - Part 9: Control charts for autocorrelated processes
[*]ISO 11462-3:2016 (ed1.0-dtr), Guidelines for implementation of statistical process control (SPC) - Part 3: SPC on test examples for software validation
[*]ISO 22514-2:2016 (ed2.0-dis), Statistical methods in process management - Capability and performance - Part 2: Process capability and performance of time-dependent process models
[*]ISO 22514-3:2016 (ed2.0-cd), Statistical methods in process management - Capability and performance - Part 3: Machine performance studies for measured data on discrete parts
[*]ISO 22514-4:2016 (ed1.0), Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures
[*]ISO 22514-5:2016 (ed1.0-dis), Statistical methods in process management - Capability and performance - Part 5: Process capability estimates and performance for attributive characteristics
[*]ISO 22514-0:2016 (ed1.0-cd), Statistical methods in process management - Capability and performance - Part 9: Process capability statistics for characteristics defined by geometrical specification
國際標準標準化組織 ISO/TC 69/SC 4 負責國際標準清單詳見 ISO 官網，相關國際標準清單部分截圖如下：
CNS 2312 管制圖國家標準早在 1965 年就制訂發行，1975 年改版迄今，並於2015 年 1 月 29 日經標檢局確認適用，內容詳見 CNS 官網，CNS 2312 管制圖國家標準現況之截圖如下所示：
相關文章請參考：ISO 統計相關標準 (http://tw-redi.com/forum.php?mod ... =373&extra=page%3D1)
頁:
[1]